Measuring technology specialist Bürgermeister manufactures high-quality vials for the global market made from ACRYLITE® molding compounds
- The long-established company has been using ACRYLITE® molding compounds as a proven material for its high-quality plastic vials for more than 60 years
- Excellent transparency, UV resistance, durability and good flow properties when used in injection molding processes
- Walter Bürgermeister GmbH uses the recyclability of Röhm’s brand PMMA to create a sustainable production process
“Our material contributes to sustainable product design.”
The idea is as simple as it is clever: For centuries, spirit levels have been used to ensure components are lying flat. Even today, it is an essential tool for construction professionals and DIY fans alike. The measurement accuracy is dependent on the quality of the vial – a liquid-filled tube with an air bubble – which is the key component of every spirit level. One of the largest international manufacturers of vials – and the market leader for block vials in the premium segment – is Walter Bürgermeister GmbH, headquartered in Kirchberg-Thening, near Linz in Austria. The company has a portfolio of around 200 different models for spirit levels and other measuring instruments and produces around 80,000 vials every day, which are then exported around the world.
For more than 60 years, Bürgermeister vials have been made from ACRYLITE® molding compounds, the brand polymethyl methacrylate (PMMA) from Röhm in the Americas. And because the company places great value on production processes that save resources, Bürgermeister also uses ACRYLITE® recyclate. “Our material contributes to sustainable product design. Not only is it extraordinarily durable, but it is also completely recyclable – and the quality remains almost unchanged,” says Heinz Schubkegel, Senior Business Manager in the Molding Compounds business unit at Röhm.
From glass to ACRYLITE®
Bürgermeister originally made glass vials. Upon founding the company in 1947, Walter Bürgermeister took inspiration from a family tradition of his wife, whose grandfather began producing glass measuring instruments back in 1898. However, with plastics becoming more widespread at the end of the 1950s, the next logical step was to manufacture spirit levels with unbreakable plastic vials.
In 1960, Bürgermeister acquired his first injection molding machine. However, he was initially limited to covering the glass vials in a layer made of ACRYLITE® molding compound, as sealing technology was not yet mature enough to make sealed plastic vials. This changed just a few years later with a modified recipe for the vial liquid and an innovative welding process. For a long time, Bürgermeister’s reliable and tight vials made from ACRYLITE® molding compounds were unique in the market.
“In addition to the high-quality raw materials, we place great value on European production standards and the short transport distances.”
Many good reasons for the brand PMMA from Röhm
The small family-owned company has long evolved into a cutting-edge enterprise. Renowned around the globe, the vial manufacturer still relies on the brand PMMA from Röhm. “We can look back on a long and trusted partnership with Röhm. In addition to the high-quality raw materials, we place great value on European production standards and the short transport distances,” says Ronald Adlbrecht, CEO at Walter Bürgermeister GmbH. He lists the most important material properties to him: “ACRYLITE® is particularly well-suited for our vials as it highly transparent and has excellent optical qualities, is UV-resistant and is easy to process in injection molding processes and subsequent processing steps.”
One of the vial manufacturer’s core competence is mold construction, enabling it to produce custom products for individual demands alongside the more standard block, tube and circular vials. The smallest vials are just three millimeters tall with a diameter of five millimeters, while the largest circular vials have a diameter of 100 millimeters and are used to align cranes, for example. Bürgermeister uses cold runner technology for limited-run series, and hot runner technology for its mass production. Following demolding, the components are processed further, with subsequent steps including the insertion of the marking rings, filling the vial with the measurement fluid and then closing the vial.
Resistant to UV radiation and chemicals
As the liquid in the spirit level is not water, but a special spirit with a dye and various additives, the vial must be resistant to chemicals. It must not develop stress cracks, as the liquid could leak and the tool would become useless. This would also be the case if the material yellowed or became brittle through weathering. UV rays could also alter the measuring liquid, which is why UV resistance is a sign of quality in vials. Components made from ACRYLITE® molding compounds are resistant to both UV rays and chemicals, ensuring they are permanently transparent – in this case, guaranteeing reliably precise measurement results.
ACRYLITE® is fully recyclable
Bürgermeister takes full advantage of the fact that the brand PMMA is easy to recycle, as the company places great emphasis on sustainability and conducts its business with saving resources and protecting the climate in mind. “We reuse material waste and leftover energy in the production process to the greatest possible extent,” emphasizes CEO Adlbrecht. Solar panels on the roof of the new plant – constructed in 2018 – create green energy, while waste heat is used for the heating system. By doing so, the company claims to have reduced the energy required for injection molding by 25 percent. Around 90 percent of production waste, such as sprues or vial caps that are no longer required, are melted down, ground to granules and reused.
“This process is only possible with top-quality raw materials. Because ACRYLITE® molding compounds from Röhm are characterized by their high optical purity, the regranulation process provides high-quality PMMA to produce new caps,” says Adlbrecht. Heinz Schubkegel says: “This is a model example of how ACRYLITE® molding compounds can contribute to a circular economy.”
With 3,500 employees and 14 production sites worldwide, Röhm is one of the leading manufacturers in the methacrylate business. The medium-sized company with branches in Germany, China, the USA, Mexico, and South Africa has more than 80 years of experience in methacrylate chemistry and a strong technology platform. Our best-known brands include PLEXIGLAS®, ACRYLITE®, MERACRYL®, DEGALAN®, DEGAROUTE® and CYROLITE®.
Polymethyl methacrylate (PMMA) products from Röhm are sold on the European, Asian, African and Australian continent under the registered trademarks PLEXIGLAS® and PLEXIMID®, in the Americas under the registered trademarks ACRYLITE® and ACRYMID®.
May 19, 2022
Transparent and robust urine meters made from CYROLITE® play a crucial role in the treatment of urology patients
Jun 25, 2021
Surgical suction handle made of CYROLITE® improves the treatment of bone defects
Pioneering medical technology
Feb 09, 2021
MediPure™ IV filters with a CYROLITE® housing ensure safe infusions
Dec 02, 2020
CYROLITE® meets the highest standards for plastics for the centric plate system (Zentrik-Platten-System – ZPS®) from Baumann Dental
Plastics for medical technology
Dec 20, 2019
Diagnostics with micro-components made of CYROLITE® reduce bleeding risks
Bleeding that occurs during or after surgery can be correctly and promptly diagnosed for targeted treatment.
Mar 15, 2019
Qosina Utilizes CYROLITE® G-20 HIFLO to Create New Disposable Luer Lock Connector
In order to keep up with customer demand and production needs, Qosina, a global supplier of single-use medical devices, recently selected Roehm’s CYROLITE® G-20 HIFLO acrylic-based copolymer compound to manufacture their own specialized luer lock connector.